- Hydraaulic Hacksaw Machine
- Drilling Machine

- Grinding Machines
- Automobile Machines
- Iron Working Machines
- Lathe Machines
- Milling Machine
- Planner Machine
- Power Press Machines
- Power Press - Esskay

CNC PRESS BRAKE MACHINE

CNC PRESS BRAKE MACHINE

- Press Brake
- Shaper Machines
- Shearing Machines
- Slotting Machines
- Thread Roller Machines
- Threading Machines
- Box Packing Machines
- Lamination Machines
- Independent Chucks
- Horizontal Boring Machine
- CNC Lathe Machines
- Vertical Turning Lathe Machine

 



- CNC Lathe Machines
  Catalogues

Features:

FEATURES:

* DESIGN OF KE PRESS BRAKE IS BASED ON S-R-B (SYNCHRONIZED BED REFERENCE) PRINCIPLE WITH Y - Y2 CONTROL.
* RIGIDLY WELDED, STRESS RELIEVED FRAME ENSURES MINIMUM DEFLECTION EVEN UNDER MAXIMUM LOAD.
* CYLINDERS FROM HIGH QUALITY FORGED STEEL ARE PRECISELY HONED. PISTONS ARE HARD CHROMED FOR LONGER LIFE.
* RIGID AND ACCURATE GUIDING OF PRESSING BEAM TO ACHIEVE DESIRED BEAM-TILT.
* FULL ELECTRONIC SYNCHRONIZATION WITH PROPORTIONAL VALVE TECHNOLOGY ASSURES CONSTANT MONITORING AND CORRECTION OF BEAM PARALLELISM THROUGH CNC SYSTEM.
* STROKE DEPTH MEASUREMENT THROUGH HIGH PRECISION LINEAR GLASS SCALES UP TO 0.021 MM.
* PRECISE PRESS BEAM DEPTH MECHANISM ENABLES DESIRED BENDING ACCURACY AND REPEATABILITY EVEN OVER LONGER
   USE.
* OFF CENTRE BENDING WITHOUT ANY DAMAGE TO GUIDING SYSTEM.
* CONTROLLER AND BACKGUAGE OPTIONS AVAILABLE.
* SAFETY REGULATIONS AS PER THE INDUSTRIAL NORMS.


CNC CONTROLLER OPTIONS:

* DELEM - KNOWN WORLDWIDE FOR DEDICATED PRESS BRAKE & SHEAR CONTROLLERS.
* ESSKAY - OFFERS BASIC NEW DA-51 & DM-54 CONTROLLER FOR 4-5 AXIS PRESS BRAKES.
* DELEM'S NEW GENERATION OF 60 SERIES CONTROLLER OPERATES UNDER WINDOWS AND OFFERS PERIPHERAL APPLICATIONS
   OPTIONS.
* DA WINDOWS IS PART OF A MODULAR SYSTEM, WHICH IS BASED ON DELEM MODUSYS ARCHITECTURE.
* CONTROLLERS CAN BE INSTALLED WITH VARIOUS AXIS MODULES & IS BASED ON DELEM INDUSTRIAL HIGH SPEED BUS (HSB)


OPTIONALS:

* N. C. CONTROL FOR COMPLETE SETTING AND OPRATON'S
* ONLY NC. BACK GAUGE
* ELECRONIC HAND SAFETY DEVICE
* DEGREE PROTACTOR ON TABLE
* BALL TRANSFER UNIT ON TABLE * EXTRA LONG SQUARING ARM
* FOUNDATION BOLTS.
* COLOR SCHEAM AS PER YOUR STD.
* ANTI DEFLECTION SYSTEM
* HYDRAULIC TOOL CLAMPING
* HYDRAULIC SHEET FOLLOWER SYSTEM
* LASER BASED BEND MEASURING SYSTEM

AXIS CONTROL FOR CNC PRESS BRAKE:

Y-AXIS : THIS AXIS IS USED FOR BENDING THE SHEET BETWEEN TOOLS AND NORMALLY ITS MOVEMENT IS CONTROLLED BY HYDRAULIC SYSTEMS. THE HYDRAULIC SYSTEM IS OPERATED BY THE COMPUTER ACCORDING TO DATA OF SHEET METAL BENDING PROFILE FEED IN TO CNC SYSTEM.

X1 AND X2 - AXIS : THIS AXIS IS USED FOR BENDING DISTANCE (FLANGE) OF THE SHEET BENDING PROFILE. THIS AXIS CAN BE ALSO CALLED BACK GAUGE AS IT IS MOUNTED BEHIND THE LOWER TOOL FOR SHEET GAUGING DISTANCE. IT CAN BE OPERATED WITH OUR CNC CONTROL SYSTEM WITH AN ACCURACY OF 0.1 MIN BY USING SERVO MOTOR DRIVES AND AMPLIFIER.

R1 AND R2 - AXLS : THIS AXIS IS NORMALLY MOUNTED WITH X-AXIS BEAM WITH SUPPORT THE BENDING SHEET IN DIFFERENT POSITION, BELOW OR UP FROM THE LOWER TOOL. IT CAN BE OPERATED WITH OUR CNC CONTROL SYSTEM WITH AN ACCURACY OF 0. 1 MM BY USING SERVO MOTOR DRIVES AND AMPLIFIER.

Z1 AND Z2 AXIS : THIS AXIS SUPPORTS THE SHEET FOR BENDING IN LONGITUDINAL DIRECTION. THE BACK STOPPER 1111GETS CAN BE INOWD RIGHT AND LEFT AS PER THE SHEET BENDING SIZE COMPUTED BY THE CNC CONTROLLER. IT CAN BE OPERATED WITH OUR CNC CONTROL SYSTEMS WITH AN ACCURACY OF 0.1 MM BY USING SERVO MOTOR DRIVES AND AMPLIFIER.

V-AXIS: THIS AXIS IS USED WHEN THE MACHINE IS USED WITH MULTIPLE LOWER V-DIE AND FOR DIFFERENT BENDING PROFILE CNC CONTROLLER DECIDE THE V-DIE TYPE AND SIZE, WHICH CAN BE OPERATED HYDRAULICALLY OR BY SERVO DRIVES.

Copyright @2005-2010 Esskay lathe & machine tools , Manufacturer, exporter & supplier of all kind of Lathe Machines & Machine Tools
TEL: +0091-1871-227255  Mail us at - info@esskaylathe.com