- Hydraulic Hacksaw Machine
- Drilling Machine

- Grinding Machines
- Automobile Machines
- Iron Working Machines
- Lathe Machines
- Milling Machine
- Planner Machine
- Power Press Machines
- Power Press - Esskay

PILLAR  DRILL  MACHINE

Pillar Drill Machine

- Press Brake
- Shaper Machines
- Shearing Machines
- Slotting Machines
- Thread Roller Machines
- Threading Machines
- Box Packing Machines
- Lamination Machines
- Independent Chucks
- Horizontal Boring Machine
- CNC Lathe Machines
- Vertical Turning Lathe Machine

 



- CNC Lathe Machines
  Catalogues

Features:

Foreword: ESSKAY presents the most modern & advanced drilling machines design. It has been built to meet the most exacting requirements of Engineering and allied Traders. It will handle efficiency at correct speeds in feet per minute. Such varied operation as Drilling,Tapping, Trepanning, Boring & counter Boring etc. in cast iron, steel, plastics and other materials can easily be accomplished. It can accommodate either straight or taper shank tools.

 

 

 

Head: A one piece of close-grain casting and robust design scientifically balanced and internally webbed for strength. By releasing locking handle Head may be raised lowered or swung round to any position relative to base.

Gearing: Gears are mounted with either self-lubricating Bronze Bearing or journal Ball Bearing. The parts are precision machined and are of the best quality material. The speed changing mechanism is located on the top of machine. The gearing system is locked mechanically in position. The method of bringing back gear into operation is the same as used in the ordinary lathes with back gear. The first gear joined to the cone pulley is released by drawing out the pin with the thumb knob at the head of that pair. Similarly when it is necessary to run without the back gear, join the gear and the cone pulley by push in the thumb pin and unmeshing the knulred thumd at the head of that in reverse direction.

Spindle return: Effectual at end of stroke by means of flat coil spring. The tension of coil spring can easily be adjusted by set screw and locknut provided.

Base: Machined working surface strongly webbed underneath. Four holes are provided for grounding or bolting the machines to the Bench.

Finish: All handles and levers are chrome plated and fitted with Ebonite knobs. A light gray enamel of special quality is used on all necessary surface

Specification of ESSKAY BRAND PILLAR  DRILL  MACHINE

DRILLING CAPACITY (MM) / MODEL NO.

EPD – 12

EPD – 15

EPD – 20

EPD-25

EPD – 32

EPD - 40

SPINDLE TRAVELS 75 90 120 155 155 190
SPINDLE CENTRE TO COL. 155 155 215 255 270 320
SPINDLE NOSE TO TABLE 305 445 535 650 950 870
SPINDLE NOSE TO BASE 410 585 815 1015 1275 1250
COLUMN DIAMETER 47 47 74.5 74.5 99.3 112.2
MORSE TAPER IN SPINDLE DRILLL CHUCK MT-2 MT-2 MT-3 MT-4 MT-4
TABLE SHAPE ROUND ROUND ROUND SQUARE ROUND ROUND
TABLE SIZE 215 235 315 335*335 460 460
BASE WORKING AREA 155*155 165*165 240*240 290*300 305*305 400*400
FLOOR  SPACE REQUIRED 210X230 225 X 330 330 X 495 380 X 585 485 X 485 510 X 735
NO. OF SPEEDS 4 4 4 8 8 8
SPINDLE SPEED WITH 1440 RPM MOTOR 700 – 2480 700-2480 50-1850 110 – 2640 80 – 2250 50-1220
HEIGHT OF MACHINE 815 MM 940 MM 1320 MM 1535 MM 1880 1960
MOTOR REQUIRED 0.5 HP 0.5 HP 1 HP 1HP 1HP 2 HP
V-BELT SIZE A-36 A-38 A 44-45 B 51-52 B 54-55 B 64-65
WEIGHT 35 KG 40 KG 90 KG 170 KG 190 KG 300 KG

Copyright @2005-2010 Esskay lathe & machine tools , Manufacturer, exporter & supplier of all kind of Lathe Machines & Machine Tools
TEL: +0091-1871-227255  Mail us at - info@esskaylathe.com