BEDWAYS OF 16 INCHES BIG BORE LATHE MACHINE- Bed is hyperbolic bridge constructed and specially designed wide opening to easy chip disposal |
it is heavily built and robust constructed in EKL-826, EKL-1026, EKL-1226, EKL-1626, EKL-2026 |
|
|
|
|
|
HEAD STOCK OF 16 INCHES BIG BORE LATHE MACHINE- Hardened and ground gears, spindle, spline, shaft quill,, |
Head stock body OF 16 INCHES BIG BORE LATHE MACHINE is latest designed by our engineers,the spindle is mounted on taper roller bearings and angular bearigns, |
The headstock OF BIG BORE LATHE MACHINE takes the load capacity of spindle and the mechanism for driving |
it. In the belt-driven type headstock, the driving mechanism consists |
of a cone pulley that drives the spindle power to run machine |
|
|
|
|
|
|
|
|
|
|
TAIL STOCK OF 16 INCHES BIG BORE LATHE MACHINE |
|
|
|
|
The main function of the tailstock is to hold the revolving center or dead center to |
support one side of the work |
|
|
|
being machined between centers., it can also be used to hold live |
centers, drills bits, reamers, and drill chucks. The tailstock |
|
moves on the bed ways along the length of the bed to work of different |
lengths. It can be clamped in the desired position by the tailstock |
clamping nut. |
|
|
|
|
|
|
|
|
|
CARRIAGE OF 16 INCHES BIG BORE LATHE MACHINES |
|
|
|
|
The carriage drives the crossfeed slide and the compound rest which |
in turn carries the cutting tool in the toolpost. The carriage slides on |
the ways along the bed |
|
|
|
The wings of |
|
|
|
|
the H-shaped saddle contain the bearing surfaces which are fitted to the bed ways |
of the bed. The cross slide is machined to form a dovetail for the |
crossfeed slide. The crossfeed slide is very close fitted to the dovetail and |
has a tapered gib which fits between the carriage |
|
dovetail and the matching dovetail of the crossfeed slide. |
|
|
|
|
|
|
APRON OF 16 INCHES BIG BORE LATHE MACHINE |
|
|
|
|
The apron is attached to the front side( operator side ) of the |
carriage. It contains the controls of the movement of the |
|
carriage for longitudinal feed and thread cutting. It controls the all |
movement of the cross-slide. One should thoroughly understand the |
construction and operation of the apron before attempting to operate the |
lathe. |
|
|
|
|
|
|
|
|
|
GEAR BOX OF 16 INCHES BIG BORE LATHE MACHINE |
|
|
|
|
for the inconvenience and loss of time involved in |
|
removing and replacing change gears, ESSKAY Brand lathes have a selfcontained |
change gear mechanism,and its called a "quick-change gear box.or Norton Gear Box" |
There are a number of types used on different types of lathes, but they are |
all similar in principle. |
|
|
|
|
|
|
|
|