Call: +91-9872172154
Lathe Machines | Heavy Duty Lathe Machine 24 ft x 30 inches bed width x 28inches height of center | Heavy Duty Lathe Machine 24ft
Heavy Duty Lathe Machine 24ft ( 1100000)
The Heavy Duty Lathe Machine is developed  for heavy turning jobs, it usually used in rolling mills, cement plants, sugar mills , for turning or working for heavy metal jobs.
The structure of heavy duty lathe machine is very rigid , graded cast iron use for making the structure of machine, normally , it is expensive than medium duty lathe machine , Heavy duty lathe machine available with sizes from 12 ft to 40 ft with height of center 500 mm to 1200 mm.
Exporting this machine to Ethiopia, Nigeria, Saudi arab, Qatar, muscat, Oman, Dubai, Singapore, Malaysia, Thailand, Indonesia, Brazil, Phillipines, Myanmar, Srilanka, Cameroon, Nepal, Bangladesh, Barcelona, Riga , Vietnam , Maldives , Zimbabwe, Uganda, Zambia

BEDWAYS- Bed is hyperbolic bridge constructed and specially designed wide opening to easy chip disposal
it is heavily built and robust constructed in EKL-1230, EKL-1630, EKL-2030  
HEAD STOCK- Hardened and ground gears, spindle, spline, shaft quill,,  
Head sstock body is latest designed by our engineers,the spindle is mounted on taper roller bearings and angular bearigns,
The headstock takes the load capacity of  spindle and the mechanism for driving
it. In the belt-driven type headstock, the driving mechanism consists  
 of a cone pulley that drives the spindle power to run machine    
TAIL STOCK          
The main function of the tailstock is to hold the revolving center or dead center to
support one side of the work        
being machined between centers., it can also be used to hold live  
centers,  drills bits, reamers, and drill chucks. The tailstock    
moves on the bed ways along the length of the bed to work of different   
lengths. It can be clamped in the desired position by the tailstock    
clamping nut.          
The carriage drives the crossfeed slide and the compound rest which  
in turn carries the cutting tool in the toolpost. The carriage slides on  
the ways along the bed         
 The wings of          
the H-shaped saddle contain the bearing surfaces which are fitted to the bed ways
of the bed. The cross slide  is machined to form a dovetail for the  
crossfeed slide. The crossfeed slide is very close fitted to the dovetail and  
has a tapered gib which fits between the carriage    
dovetail and the matching dovetail of the crossfeed slide.    
The apron is attached to the front side( operator side ) of the    
carriage. It contains the controls of the movement of the    
carriage for longitudinal feed and thread cutting. It controls the all  
movement of the cross-slide. One should thoroughly understand the  
construction and operation of the apron before attempting to operate the  
GEAR BOX          
for the inconvenience and loss of time involved in    
removing and replacing change gears, ESSKAY Brand  lathes have a selfcontained
change gear mechanism,and its called a "quick-change gear box.or Norton Gear Box"
There are a number of types used on different types of lathes, but they are  
all similar in principle.