Call: +91-9872172154
Lathe Machines | Geared high speed lathe machine 6feet | 4ft high speed geared lathe machine
4ft high speed geared lathe machine ( 150000)
Engine Lathe Machine is operated by the pully mechanism or gear mechanism. It is one of the most used lathe machines. It consists of a bed, tailstock, head etc. The head tock even provides multiple spindles speed. Basically, the headstock is stiff in structure.
This type of Engine lathe machine is utilised in workshops and many other industries. It is capable of feeding the cutting tool in the cross as well as a longitudinal direction while being connected with to the lathe axis with the help of leadscrew and carriage feed. It consists of three belts: Geared type, belt driven and motor driven



BEDWAYS- Bed is hyperbolic bridge constructed and specially designed wide opening to easy chip disposal
it is heavily built and robust constructed in ESSAL-35, ESSAL-36, ESSAL-43 MODELS
     
HEAD STOCK- Hardened and ground gears, spindle, spline, shaft quill,,
Head sstock body is latest designed by our engineers,the spindle is mounted on taper roller bearings and angular bearigns,
The headstock takes the load capacity of  spindle and the mechanism for driving
it. In the belt-driven type headstock, the driving mechanism consists
 of a cone pulley that drives the spindle power to run machine
     
     
TAIL STOCK    
The main function of the tailstock is to hold the revolving center or dead center to
support one side of the work  
being machined between centers., it can also be used to hold live
centers,  drills bits, reamers, and drill chucks. The tailstock
moves on the bed ways along the length of the bed to work of different 
lengths. It can be clamped in the desired position by the tailstock
clamping nut.    
     
CARRIAGE    
The carriage drives the crossfeed slide and the compound rest which
in turn carries the cutting tool in the toolpost. The carriage slides on
the ways along the bed   
 The wings of    
the H-shaped saddle contain the bearing surfaces which are fitted to the bed ways
of the bed. The cross slide  is machined to form a dovetail for the
crossfeed slide. The crossfeed slide is very close fitted to the dovetail and
has a tapered gib which fits between the carriage
dovetail and the matching dovetail of the crossfeed slide.
     
APRON    
The apron is attached to the front side( operator side ) of the
carriage. It contains the controls of the movement of the
carriage for longitudinal feed and thread cutting. It controls the all
movement of the cross-slide. One should thoroughly understand the
construction and operation of the apron before attempting to operate the
lathe.    
     
GEAR BOX    
for the inconvenience and loss of time involved in
removing and replacing change gears, ESSKAY Brand  lathes have a selfcontained
change gear mechanism,and its called a "quick-change gear box.or Norton Gear Box"
There are a number of types used on different types of lathes, but they are
all similar in principle.