Call: +91-9872172154
Lathe Machines | Semi - Geared Lathe Machines 10 feet x 18inches bed width x 16inches center height | 10 ft semi geared lathe
10 ft semi geared lathe ( 300000)

Esskay Brand 10 feet semi gear head lathe machine uses for high quality finish work in less time.Semi Gear head Lathe Machine available in 10ffet length 18inches bed width 16inches center height

.#LatheMachine #LatheMachinePrice #LatheMachineManufacturer #BestLatheMachine #GoodQualityLatheMachine #semigearheadlathemachine #semigearedlathemachine

 




BEDWAYS of 10 feet semi gear head lathe machine- Bed is hyperbolic bridge constructed and specially designed wide opening to easy chip disposal
it is heavily built and robust constructed in EKL-1018S
     
HEAD STOCK of 10 feet semi gear head lathe machine- Hardened and ground gears, spindle, spline, shaft quill,,
Head stock of 10 feet semi gear head LATHE MACHINE body is latest designed by our engineers,the spindle is mounted on taper roller bearings and angular bearigns,
The headstock takes the load capacity of  spindle and the mechanism for driving
it. In the belt-driven type headstock of 10 feet semi gear head lathe machine, the driving mechanism consists
 of a cone pulley that drives the spindle power to run machine
     
     
TAIL STOCK of 10 feet semi gear head lathe machine    
The main function of the tailstock iof 10 feet semi gear head lathe machine is to hold the revolving center or dead center to
support one side of the work  
being machined between centers., it can also be used to hold live
centers,  drills bits, reamers, and drill chucks. The tailstock
moves on the bed ways along the length of the bed to work of different 
lengths. It can be clamped in the desired position by the tailstock
clamping nut.    
     
CARRIAGE OF 10 feet semi gear head LATHE MACHINE    
The carriage drives the crossfeed slide and the compound rest which
in turn carries the cutting tool in the toolpost. The carriage slides  of 10 feet semi gear head lathe machine on
the ways along the bed   
 The wings of    
the H-shaped saddle contain the bearing surfaces which are fitted to the bed ways
of the bed. The cross slide of 10 feet semi gear head lathe MACHINE  is machined to form a dovetail for the
crossfeed slide. The crossfeed slide is very close fitted to the dovetail and
has a tapered gib which fits between the carriage
dovetail and the matching dovetail of the crossfeed slide.
     
APRON OF 10 feet semi gear head LATHE MACHINE    
The apron OF 10 feet semi gear head LATHE MACHINE is attached to the front side( operator side ) of the
carriage. It contains the controls of the movement of the
carriage for longitudinal feed and thread cutting. It controls the all
movement of the cross-slide. One should thoroughly understand the
construction and operation of the apron before attempting to operate the 10 feet semi gear head LATHE MACHINE
lathe.    
     
GEAR BOX OF 10 feet semi gear head LATHE MACHINE    
for the inconvenience and loss of time involved in
removing and replacing change gears, ESSKAY Brand 10 feet semi gear head lathes have a selfcontained
change gear mechanism,and its called a "quick-change gear box.or Norton Gear Box"
There are a number of types used on different types of lathes, but they are
all similar in principle.