BEDWAYS- Bed is hyperbolic bridge constructed and specially designed wide opening to easy chip disposal |
it is heavily built and robust constructed in EKL-1230, EKL-1630, EKL-2030 |
|
|
|
|
|
|
|
|
|
HEAD STOCK- Hardened and ground gears, spindle, spline, shaft quill,, |
|
|
Head sstock body is latest designed by our engineers,the spindle is mounted on taper roller bearings and angular bearigns, |
The headstock takes the load capacity of spindle and the mechanism for driving |
|
it. In the belt-driven type headstock, the driving mechanism consists |
|
|
of a cone pulley that drives the spindle power to run machine |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TAIL STOCK |
|
|
|
|
|
|
The main function of the tailstock is to hold the revolving center or dead center to |
|
support one side of the work |
|
|
|
|
|
being machined between centers., it can also be used to hold live |
|
|
centers, drills bits, reamers, and drill chucks. The tailstock |
|
|
|
moves on the bed ways along the length of the bed to work of different |
|
|
lengths. It can be clamped in the desired position by the tailstock |
|
|
|
clamping nut. |
|
|
|
|
|
|
|
|
|
|
|
|
|
CARRIAGE |
|
|
|
|
|
|
The carriage drives the crossfeed slide and the compound rest which |
|
|
in turn carries the cutting tool in the toolpost. The carriage slides on |
|
|
the ways along the bed |
|
|
|
|
|
The wings of |
|
|
|
|
|
|
the H-shaped saddle contain the bearing surfaces which are fitted to the bed ways |
|
of the bed. The cross slide is machined to form a dovetail for the |
|
|
crossfeed slide. The crossfeed slide is very close fitted to the dovetail and |
|
|
has a tapered gib which fits between the carriage |
|
|
|
dovetail and the matching dovetail of the crossfeed slide. |
|
|
|
|
|
|
|
|
|
|
APRON |
|
|
|
|
|
|
The apron is attached to the front side( operator side ) of the |
|
|
|
carriage. It contains the controls of the movement of the |
|
|
|
carriage for longitudinal feed and thread cutting. It controls the all |
|
|
movement of the cross-slide. One should thoroughly understand the |
|
|
construction and operation of the apron before attempting to operate the |
|
|
lathe. |
|
|
|
|
|
|
|
|
|
|
|
|
|
GEAR BOX |
|
|
|
|
|
|
for the inconvenience and loss of time involved in |
|
|
|
removing and replacing change gears, ESSKAY Brand lathes have a selfcontained |
|
change gear mechanism,and its called a "quick-change gear box.or Norton Gear Box" |
|
There are a number of types used on different types of lathes, but they are |
|
|
all similar in principle. |
|
|
|
|
|
|
|
|
|
|
|
|