Call: +91-9872172154
Lathe Machines | 6 feet Belt Driven Lathe Machine | 6feet Belt Driven Lathe Machine
6feet Belt Driven Lathe Machine ( 130000)
6 feet Belt Driven Lathe Machines are  operated by the pully mechanism or gear mechanism.Esskay Manufacturers Belt driven lathe machines in very good quality with high accuracy.#LatheMachine #LatheMachinePrice #LatheMachineManufacturer #BestLatheMachine #GoodQualityLatheMachine #lathemachineprice bed width 16inches inchyes , height of center 14 inches inches spindle bore 105mm

BEDWAYS - Bed is hyperbolic bridge constructed and specially designed wide opening to easy chip disposal
it is heavily built and robust constructed in EKL-412, EKL-612, EKL-812    
HEAD STOCK - Hardened and ground gears, spindle, spline, shaft quill,,    
Head sstock body is latest designed by our engineers,the spindle is mounted on taper roller bearings and angular bearigns,
The headstock takes the load capacity of  spindle and the mechanism for driving  
it. In the belt-driven type headstock, the driving mechanism consists    
 of a cone pulley that drives the spindle power to run machine      
TAIL STOCK            
The main function of the tailstock is to hold the revolving center or dead center to  
support one side of the work          
being machined between centers., it can also be used to hold live    
centers,  drills bits, reamers, and drill chucks. The tailstock      
moves on the bed ways along the length of the bed to work of different     
lengths. It can be clamped in the desired position by the tailstock      
clamping nut.            
The carriage drives the crossfeed slide and the compound rest which    
in turn carries the cutting tool in the toolpost. The carriage slides on    
the ways along the bed           
 The wings of            
the H-shaped saddle contain the bearing surfaces which are fitted to the bed ways  
of the bed. The cross slide  is machined to form a dovetail for the    
crossfeed slide. The crossfeed slide is very close fitted to the dovetail and    
has a tapered gib which fits between the carriage      
dovetail and the matching dovetail of the crossfeed slide.      
The apron is attached to the front side( operator side ) of the      
carriage. It contains the controls of the movement of the      
carriage for longitudinal feed and thread cutting. It controls the all    
movement of the cross-slide. One should thoroughly understand the    
construction and operation of the apron before attempting to operate the    
GEAR BOX            
for the inconvenience and loss of time involved in      
removing and replacing change gears, ESSKAY Brand  lathes have a selfcontained  
change gear mechanism,and its called a "quick-change gear box.or Norton Gear Box"  
There are a number of types used on different types of lathes, but they are    
all similar in principle.