Call: +91-9872172154
Lathe Machines | BELT DRIVEN LATHE MACHINES | HEIGHT OF CENTER 450 MM
HEIGHT OF CENTER 450 MM
Esskay Machines Qualities          
Best part of our machines are accuracy , we are conducting all accuracy trials          
on our machines  as per IS standard no 6040 .      
Customer  can get full satisfaction on our machines    
we are using all branded items on our lathe machine, all geares are hardened and ground 
and made on Tos brand  Gear shaving machine      
Bedways are flame hardened  and flame hardened bed ways are covered by Turcit-B Linings,
By this provision, bed life of machine will become longer around 25 years.  
All machine supplied with Operation manual, service manual, Foundation drawings, Ga drawings
Electrical circuit drawings, spare parts purchase manuals etc.    



BEDWAYS - Bed is hyperbolic bridge constructed and specially designed wide opening to easy chip disposalit is heavily built and robust constructed in EKL-820, EKL-1020, EKL-1220

 HEAD STOCK - Hardened and ground gears, spindle, spline, shaft quill,,  Head sstock body is latest designed by our engineers,the spindle is mounted on taper roller bearings and angular bearigns,The headstock takes the load capacity of  spindle and the mechanism for driving it. In the belt-driven type headstock, the driving mechanism consists   of a cone pulley that drives the spindle power to run machine  

TAIL STOCK      The main function of the tailstock is to hold the revolving center or dead center to support one side of the work     being machined between centers., it can also be used to hold live  centers,  drills bits, reamers, and drill chucks. The tailstock   moves on the bed ways along the length of the bed to work of different   lengths. It can be clamped in the desired position by the tailstock   clamping nut.             CARRIAGE      The carriage drives the crossfeed slide and the compound rest which  in turn carries the cutting tool in the toolpost. The carriage slides on  the ways along the bed       The wings of      the H-shaped saddle contain the bearing surfaces which are fitted to the bed ways of the bed. The cross slide  is machined to form a dovetail for the  crossfeed slide. The crossfeed slide is very close fitted to the dovetail and  has a tapered gib which fits between the carriage   dovetail and the matching dovetail of the crossfeed slide.         

 APRON      The apron is attached to the front side( operator side ) of the   carriage. It contains the controls of the movement of the   carriage for longitudinal feed and thread cutting. It controls the all  movement of the cross-slide. One should thoroughly understand the  construction and operation of the apron before attempting to operate the  lathe.             

GEAR BOX      for the inconvenience and loss of time involved in   removing and replacing change gears, ESSKAY Brand  lathes have a selfcontained change gear mechanism,and its called a "quick-change gear box.or Norton Gear Box" There are a number of types used on different types of lathes, but they are  all similar in principle.