|Esskay Machines Qualities|
|Best part of our machines are accuracy , we are conducting all accuracy trials|
|on our machines as per IS standard no 6040 .|
|Customer can get full satisfaction on our machines|
|we are using all branded items on our lathe machine, all geares are hardened and ground|
|and made on Tos brand Gear shaving machine|
|Bedways are flame hardened and flame hardened bed ways are covered by Turcit-B Linings,|
|By this provision, bed life of machine will become longer around 25 years.|
|All machine supplied with Operation manual, service manual, Foundation drawings, Ga drawings|
|Electrical circuit drawings, spare parts purchase manuals etc.|
EDWAYS - Bed is hyperbolic bridge constructed and specially designed wide opening to easy chip disposalit is heavily built and robust constructed in EKL-824, EKL-1024, EKL-1224, EKL-1624, EKL-2024
HEAD STOCK - Hardened and ground gears, spindle, spline, shaft quill,, Head sstock body is latest designed by our engineers,the spindle is mounted on taper roller bearings and angular bearigns,The headstock takes the load capacity of spindle and the mechanism for driving it. In the belt-driven type headstock, the driving mechanism consists of a cone pulley that drives the spindle power to run machine
TAIL STOCK The main function of the tailstock is to hold the revolving center or dead center to support one side of the work being machined between centers., it can also be used to hold live centers, drills bits, reamers, and drill chucks. The tailstock moves on the bed ways along the length of the bed to work of different lengths. It can be clamped in the desired position by the tailstock clamping nut. CARRIAGE The carriage drives the crossfeed slide and the compound rest which in turn carries the cutting tool in the toolpost. The carriage slides on the ways along the bed The wings of the H-shaped saddle contain the bearing surfaces which are fitted to the bed ways of the bed. The cross slide is machined to form a dovetail for the crossfeed slide. The crossfeed slide is very close fitted to the dovetail and has a tapered gib which fits between the carriage dovetail and the matching dovetail of the crossfeed slide.
APRON The apron is attached to the front side( operator side ) of the carriage. It contains the controls of the movement of the carriage for longitudinal feed and thread cutting. It controls the all movement of the cross-slide. One should thoroughly understand the construction and operation of the apron before attempting to operate the lathe.
GEAR BOX for the inconvenience and loss of time involved in removing and replacing change gears, ESSKAY Brand lathes have a selfcontained change gear mechanism,and its called a "quick-change gear box.or Norton Gear Box" There are a number of types used on different types of lathes, but they are all similar in principle.
Copyrights © 2005-2019 Esskay Lathe & Machine Tools (India). Manufacturer, exporter & supplier of all kind of Lathe, CNC Lathe Machines & Machine Tools