Call: +91-9872172154
Lathe Machines | All Geared Lathe Machines | HEIGHT OF CENTER 300 MM
Esskay Machines Qualities            
Best part of our machines are accuracy , we are conducting all accuracy trials            
on our machines  as per IS standard no 6040 .        
Customer  can get full satisfaction on our machines        
we are using all branded items on our lathe machine, all geares are hardened and ground   
and made on Tos brand  Gear shaving machine        
Bedways are flame hardened  and flame hardened bed ways are covered by Turcit-B Linings,  
By this provision, bed life of machine will become longer around 25 years.    
All machine supplied with Operation manual, service manual, Foundation drawings, Ga drawings  
Electrical circuit drawings, spare parts purchase manuals etc.      
After sales services          
ESSKAY qualified and trainned engineers are ready by 24 x 7      
and available  in any location of india ,        
First year service is warranted and will be free of cost  after completion of warranty period ,  
it is chargeable,            
Installation charges are extra and chargeable         
Esskay is handling all type of logistics as per customer demand      
we provide door to door delivery services without any worries      
customer don’t have to arrange any logistics from our side.      
Terms of Payment          
ONLINE PAYMENT             
BANK GUARANTEE            
24 X 7 Help Line services          
provide solutions on video call          
Arrangement of Engineer services with in 24 hours        
Provide help in video call for installing the machines        
Customer operators Training will be provided free of cost at our factory    

BEDWAYS- Bed is hyperbolic bridge constructed and specially designed wide opening to easy chip disposal  
it is heavily built and robust constructed in ESSAL-715, ESSAL-915, ESSAL-1015 MODELS      
HEAD STOCK- Hardened and ground gears, spindle, spline, shaft quill,,        
Head stock body is latest designed by our engineers,the spindle is mounted on taper roller bearings and angular bearigns,
The headstock takes the load capacity of  spindle and the mechanism for driving      
it. In the belt-driven type headstock, the driving mechanism consists        
 of a cone pulley that drives the spindle power to run machine          
TAIL STOCK                
The main function of the tailstock is to hold the revolving center or dead center to      
support one side of the work              
being machined between centers., it can also be used to hold live        
centers,  drills bits, reamers, and drill chucks. The tailstock          
moves on the bed ways along the length of the bed to work of different         
lengths. It can be clamped in the desired position by the tailstock          
clamping nut.                
The carriage drives the crossfeed slide and the compound rest which        
in turn carries the cutting tool in the toolpost. The carriage slides on        
the ways along the bed               
The wings of                
the H-shaped saddle contain the bearing surfaces which are fitted to the bed ways      
of the bed. The cross slide  is machined to form a dovetail for the        
crossfeed slide. The crossfeed slide is very close fitted to the dovetail and        
has a tapered gib which fits between the carriage          
dovetail and the matching dovetail of the crossfeed slide.          
The apron is attached to the front side( operator side ) of the          
carriage. It contains the controls of the movement of the          
carriage for longitudinal feed and thread cutting. It controls the all        
movement of the cross-slide. One should thoroughly understand the        
construction and operation of the apron before attempting to operate the        
GEAR BOX                
for the inconvenience and loss of time involved in          
removing and replacing change gears, ESSKAY Brand  lathes have a selfcontained      
change gear mechanism,and its called a "quick-change gear box.or Norton Gear Box"      
There are a number of types used on different types of lathes, but they are        
all similar in principle.