Call: +91-9872172154
Lathe Machines | Medium Duty Lathe Machine | HEIGHT OF CENTER 300 MM
HEIGHT OF CENTER 300 MM ( )
Medium Duty Lathe Machines are  operated by the pully mechanism or gear mechanism. It is one of the most commonly used lathe machines. Medium Duty Lathe Machine consists of a bed, tailstock, head etc. The head stock of Medium Duty  Lathe Machine even provides multiple spindles speed. Basically, the headstock of Medium Duty Lathe Machine is stiff in structure and fitted with big gears , big pully system to maintain number of speeds, whenever to change the speed , operator has to change the v-belts from smaller to bigger groove of cone pully.
Medium duty lathe machine is 6ft in size, price of 6ft lathe machine is 125000.00 inr, Esskay Lathe & Machine Tools  is the Manufacturer of all types of 6ft lathe machines in Batala-punjab-india



BEDWAYS- Bed is hyperbolic bridge constructed and specially designed wide opening to easy chip disposal
it is heavily built and robust constructed in EKL-614, EKL-814, EKL-1014  
           
HEAD STOCK- Hardened and ground gears, spindle, spline, shaft quill,,  
Head sstock body is latest designed by our engineers,the spindle is mounted on taper roller bearings and angular bearigns,
The headstock takes the load capacity of  spindle and the mechanism for driving
it. In the belt-driven type headstock, the driving mechanism consists  
 of a cone pulley that drives the spindle power to run machine  
           
           
TAIL STOCK          
The main function of the tailstock is to hold the revolving center or dead center to
support one side of the work        
being machined between centers., it can also be used to hold live  
centers,  drills bits, reamers, and drill chucks. The tailstock    
moves on the bed ways along the length of the bed to work of different 
lengths. It can be clamped in the desired position by the tailstock  
clamping nut.          
           
CARRIAGE          
The carriage drives the crossfeed slide and the compound rest which  
in turn carries the cutting tool in the toolpost. The carriage slides on  
the ways along the bed         
 The wings of          
the H-shaped saddle contain the bearing surfaces which are fitted to the bed ways
of the bed. The cross slide  is machined to form a dovetail for the  
crossfeed slide. The crossfeed slide is very close fitted to the dovetail and
has a tapered gib which fits between the carriage    
dovetail and the matching dovetail of the crossfeed slide.    
           
APRON          
The apron is attached to the front side( operator side ) of the  
carriage. It contains the controls of the movement of the    
carriage for longitudinal feed and thread cutting. It controls the all  
movement of the cross-slide. One should thoroughly understand the  
construction and operation of the apron before attempting to operate the
lathe.          
           
GEAR BOX          
for the inconvenience and loss of time involved in    
removing and replacing change gears, ESSKAY Brand  lathes have a selfcontained
change gear mechanism,and its called a "quick-change gear box.or Norton Gear Box"
There are a number of types used on different types of lathes, but they are
all similar in principle.