Call: +91-9872172154
Lathe Machines | All Geared Lathe Machines | HEIGHT OF CENTER 450 MM
HEIGHT OF CENTER 450 MM
HEIGHT-OF-CENTER-450-MM
Esskay Machines Qualities            
Best part of our machines are accuracy , we are conducting all accuracy trials            
on our machines  as per IS standard no 6040 .        
Customer  can get full satisfaction on our machines        
we are using all branded items on our lathe machine, all geares are hardened and ground   
and made on Tos brand  Gear shaving machine        
Bedways are flame hardened  and flame hardened bed ways are covered by Turcit-B Linings,  
By this provision, bed life of machine will become longer around 25 years.    
All machine supplied with Operation manual, service manual, Foundation drawings, Ga drawings  
Electrical circuit drawings, spare parts purchase manuals etc.      



HEIGHT OF CENTER 450 MM




BEDWAYS- Bed is hyperbolic bridge constructed and specially designed wide opening to easy chip disposal
it is heavily built and robust constructed in ESSAL-920, ESSAL-1020, ESSAL-1220, ESSAL-1420  MODELS    
               
HEAD STOCK- Hardened and ground gears, spindle, spline, shaft quill,,      
Head stock body is latest designed by our engineers,the spindle is mounted on taper roller bearings and angular bearigns,
The headstock takes the load capacity of  spindle and the mechanism for driving    
it. In the belt-driven type headstock, the driving mechanism consists      
 of a cone pulley that drives the spindle power to run machine        
               
               
TAIL STOCK              
The main function of the tailstock is to hold the revolving center or dead center to    
support one side of the work            
being machined between centers., it can also be used to hold live      
centers,  drills bits, reamers, and drill chucks. The tailstock        
moves on the bed ways along the length of the bed to work of different       
lengths. It can be clamped in the desired position by the tailstock        
clamping nut.              
               
CARRIAGE              
The carriage drives the crossfeed slide and the compound rest which      
in turn carries the cutting tool in the toolpost. The carriage slides on      
the ways along the bed             
 The wings of              
the H-shaped saddle contain the bearing surfaces which are fitted to the bed ways    
of the bed. The cross slide  is machined to form a dovetail for the      
crossfeed slide. The crossfeed slide is very close fitted to the dovetail and      
has a tapered gib which fits between the carriage        
dovetail and the matching dovetail of the crossfeed slide.        
               
APRON              
The apron is attached to the front side( operator side ) of the        
carriage. It contains the controls of the movement of the        
carriage for longitudinal feed and thread cutting. It controls the all      
movement of the cross-slide. One should thoroughly understand the      
construction and operation of the apron before attempting to operate the      
lathe.              
               
GEAR BOX              
for the inconvenience and loss of time involved in        
removing and replacing change gears, ESSKAY Brand  lathes have a selfcontained    
change gear mechanism,and its called a "quick-change gear box.or Norton Gear Box"    
There are a number of types used on different types of lathes, but they are      
all similar in principle.